User Manual Part 1

Product Description 2-6MTX5000 User and Technical Manual Product Description 2-6MTX5000 User and Technical Manual
Figure 2-6: MTX5000 IDU Rear Panel Configurations
ETHERNET
RTN DATA
WAYSIDE
ATPC
AUDIO
1
2
3
4
+ G -
+ G -
+ G -
+ G -
SUM
ALARM
AES/EBU
VIDEO IN
BB IN
IF MON
AC-3
SMPTE 302
ASI 1 HD-SDI ASI 2
IF IN
VID MON
SDI/ASI
ANT
CONTROL
RFU POWER OUT
RFU 1
RFU 2
H
V
LCP
ANT2
BAND2
GND
+
- - + +
- - + +
1
2
POWER IN
+ G -
+ G -
1
2
ANT
CONTROL
RFU POWER OUT
RFU 1
RFU 2
H
V
LCP
ANT2
BAND2
GND
+
- - + +
- - + +
1
2
MTX5000 IDU
Configuration with Triax
Connectors
MTX5000 IDU
Configuration with Type
“N” or TNC Connectors
Figure 2-7: MTX5000 ODU Connectors
RF OUT
RF IN
IDU
RF OUT
Connector
POWER
Connector
(With TNC
and Type
“N” RF IN
Connector
Options
Only)
RF IN
Connector
The IDU connects to the ODU through the wiring harness
between the units. The wiring harness contains DC power, 70
MHz IF, and control for all components mounted on the top of
the antenna mast. Functions and control contained in the wiring
harness typically include the following:
• 70 MHz IF, control, and alarms between the IDU and the
ODU
• DC power to the ODU
• Power and control for an RF switch to select antennas
• Power and control for antenna switching functions (band,
polarization, and power)