User Manual Part 1

Advanced Operations 5-17MTX5000 User and Technical Manual
58. Select the Save option button and observe the
numeric keypad is displayed. See Figure 5-31.
Figure 5-31: Numeric Keypad - Typical
Notes
When saving Presets in the following steps, Preset
A thru Preset J are factory default Presets. The
factory default Presets cannot be changed.
Notes
To change the default Preset number, perform step
59 and go to step 60.
To accept the next available Preset number, go to
step 60.
59. Select the CLR key and enter the Preset number
required.
60. Select the ENT key and observe the Are you sure?
confirmation screen is displayed. See Figure 5-32.
1 2 3
4
7
5 6
8 9
CLR
0
ESC
ENT
Next Available
Preset Number
Figure 5-32: Confirmation Screen
61. Select the YES option button and observe the Please
Wait! message box is displayed. See Figure 5-33.
Figure 5-33: Please Wait Message Box
62. After a short delay, observe the Save As Preset
screen is displayed.
63. Select the Main option button and observe the Main
screen is displayed.
5.4.2 Create or Update Digital COFDM Preset
Configuration Settings in Local Mode
The procedure required to create a new custom digital COFDM
Preset configuration or to update an existing digital COFDM
Preset configuration is contained in the following steps.
When preparing a new digital COFDM Preset, you must first
select an existing digital COFDM Preset from either one of the
No
Are you sure?
Yes
No
Please Wait!
Yes