User Manual Part 1

Advanced Operations 5-16MTX5000 User and Technical Manual
Figure 5-29: Save As Preset Screen - Typical
Notes
In the following steps, if a factory default analog
Preset was used as a “make-from” to prepare this
custom Preset, the Preset Text text box and the
Save text box must be changed. You cannot
change or overwrite any factory default
Presets!
If a custom analog Preset was used as a “make-
from” to prepare this custom Preset, a brief
description of the custom Preset should be entered
in the Preset Text text box for easy identification
purposes.
55. Select the Preset Text option button and observe the
keyboard screen is displayed. See Figure 5-30.
Save As Preset
Back
Preset Text
Analog
4.83 & 6.2, 4MHz Vid Dev
Save A
Main
Figure 5-30: Keyboard Screen
56. Enter a unique analog Preset description, as required,
and select the Enter key.
57. Observe the Save As Preset screen is displayed and
the Preset Text text box displays the Preset
description.
Notes
When saving the new custom analog Preset in the
following step, the Preset number will automatically
be increased to the next available Preset number
to avoid overwriting an existing Preset.
If you wish to overwrite the existing Preset number
(unless it is a factory default Preset), enter the
Preset number to be overwritten. A warning
message will be displayed asking “Are you
sure?”. Select the Yes option button.
Once an existing custom Preset is overwritten, it
cannot be recovered. It must be re-entered from
scratch.
! @ # $ % ^ & * ( ) _ +
Q W E R T Y U I O P { }
A S D F G H J K L :
Z X C V B N M < > ?
Shift BS
Clear CancelEnter
“