User Manual Part 1

Advanced Operations 5-4MTX5000 User and Technical Manual
The MTX5000 IDU provides password control of the system to
prevent unauthorized personnel from making changes to Preset
settings. Local mode password control of the system may only
be performed with the MTX5000 IDU in the Local mode of
operation.
All passwords are case-sensitive. The MTX5000 IDU is
delivered with a default password. When your IDU is received
from the factory, the default password is PASSWORD.
The default password should be changed to your own personal
password upon receipt of the MTX5000 System. Your new
password should be recorded and should be maintained in a
secure location.
The procedure required to change the default or current
password to another password of your choice is contained in the
following steps.
Note
In the following steps, the color LCD display option
buttons and pull-down menu options may be
selected using either the touch screen or the
function keys and the SEL key.
1. Verify the MTX5000 IDU is powered up. See
”Powering the MTX5000 System” on page 3-7.
2. Observe the Main screen is displayed. See Figure 5-
1.
Figure 5-1: Main Screen - Typical
3. Select the Main screen PA operation button for PA
Off, as required.
4. Select the L/R option button for L (local mode), as
required.
5. Select the Setup option button and observe the Setup
screen is displayed. See Figure 5-2.
Figure 5-2: Setup Screen
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU1
No RF
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA Off
SUM
ODU
IDU
RF
L/R
L
L
PA
Operation
Button
Setup
User
Main
Radio