User's Manual

Page 94
NewStream User Guide and Technical Manual
Manual Mode Pages
When you are operating NewStream and you want the option of manual control, you
must begin with the type of preset that you want to regulate. For instance, to manually
control CNG mode, you must begin operations using a CNG preset. Setting Cell Mode
Delay in Manual Mode is exclusive to setting the device into CNG operation; thus
Manual Mode Modulation settings would not be applicable. Manual Mode could be
used to temporarily change parameters and have the changes applied immediately,
automatically placing
NewStream into Manual Mode which is designed to be used to
change preset confi gurations without modifying a saved preset. Manual Mode can be
used to test transmission options.
Generally, use of Manual Mode is intended for technician troubleshooting and setup
and not for use in fi eld operations. For more information concerning the entry fi elds
available, refer to the Modify Presets section. The collapsed Manual Mode Setup page
is shown in the fi gure below.
Figure 42: Manual Mode Settup Page