User's Manual

Page 61
NewStream User Guide and Technical Manual
Satellite Status Page [Continued]
Radio Frequency Control
Carrier
This button provides a means to toggle the CW carrier On and Off; enabling the carrier
frequency output or disabling the carrier frequency output. The default state is Off.
Modulation
This button allows you to turn Modulation on or off.
Power Level
This fi eld displays the Satellite News Gathering L-Band RF level that is output from the
rear panel L-Band connector.
Power Level
This fi eld displays the Satellite News Gathering L-Band RF level that is output from the
rear panel L-Band connector.
Power Level Adjust
This fi eld is used to adjust the L-Band power output in 0.5dB steps. You can use the
arrow buttons to select an Attenuation level from 0 to 40.
Encoding Status
This set of fi elds present the settings to which the NewStream’s Encoder is currently
set. These fi elds are read-only.
Video Status
This LED is lit green when video encoder is sending a signal to the designated receiver.
It is lit red when Video transmission has stopped or when the video encoder is powered
down.
Video Encoding
The Video Encoding fi eld displays one of three options:
• MPEG2
• H.264
• External ASI