User's Manual

Page 26
NewStream User Guide and Technical Manual
Local Microwave Control
Microwave transmission is implemented using an ENG preset and the NewStream or
legacy Outdoor Units. The ENG Status touchscreens are shown below and the ODU
Information touchscreen is shown in Figure 14. ODU functional explanations follow
along with diagrams of the NewStream and legacy ODUs in Figures A-1 through A-4.
Before starting operation, set the IDU to Remote Mode and go to the Modify Presets
Web interface to make unique copies of the ENG, SNG and CNG Presets in order to
create customized presets that your operators will use during broadcast. For more
information refer to the
Modify Presets section. For Remote Control operation see
the sections below:
Confi guration Mode touchscreen and Remote Operation Using the
Web Interface
ENG Status
The Microwave Status touchscreens display Video and Audio Encoders, Modulator
and Transport Stream Status listings for the current preset. Each of the pages can be
viewed using a swiping motion. The scroll bar at the bottom of the Status touchscreens
indicates the relative position of each screen. For further information about the listed
settings, refer to the Status Web interface section. Refer below to Figure 14 -17 for
examples of the listed information.
Figure 14:
NewStream ENG Encoder Video Status Touchscreen