User's Manual

14
existing programming. The SETUP screen allows qualified maintenance
personnel to program new presets and edit existing presets.
Initial Setup: C l ick on the word ―Se tup ‖ in menu bar at the top of the
display. In the main area of the display, the General Setup screen will open
as shown below.
GENERAL SETUP SCREEN
In the example above, the MPEG-4/ H.264 encoding mode is active for the
current preset. It may be changed to MPEG 2 by clicking on the MPEG-2
dot, and then clicking the submit button.
NOTE: If your HDX-1100 is not equipped with the MPEG-2 option, this
choice will not be clickable.