User's Manual

MAIN SCREEN OPERATION

When operating the HDX-1100 transmitter in local mode (touch screen active), the main screen

will be displayed first. The current preset and channel selections are controlled by touching the

up and down buttons below the respective sections of the display. For example, to move to a

lower channel, touch the down arrow below the CHANNEL bar in the main screen.

High or low power may be selected by touching the PA HIGH/ LOW button, which will toggle the

setting between HIGH and LOW each time the button is touched. The label will change to

confirm that the new selection has been completed.

PA ON or PA OFF settings are selected by touching the PA ON/OFF button, which will toggle the

setting between ON and OFF each time the button is touched. The label will change to confirm

that the new selection has been completed.

NOTE: When changing channels, the PA will automatically shut off to avoid interference

with other users, as the frequency changes. It must be manually turned on again once the

frequency change is complete (the display will change to new channel selection).

Channel Menu

Channel: Displays current channel selection

MHz: Frequency of current channel

Left/Right Arrows : move cursor left or right

Up – Down: Changes the selected frequency digit

Set Frequency: Touch this button to set or change current channel

Back: Will save setting and return to Main screen

7.1 SETTING OR MODIFYING CHANNEL FREQUENCY

To initiate or modify a channel frequency, first select the channel assignment to be modified on

the main screen, then touch the CHANNEL MENU button on the main screen; the display will