User Manual

1-10

HDT-1000S2 User and Technical

Rev 1

6 Using a PC to Control the HDT-1000S2

To set up your HDT-1000S2 with a PC, do the following:

1. Connect a LAN cable to the network connection of a router or switch and the ethernet

port on the HDT-1000S2.

2. Open a web browser and type 192.168.4.150 into the URL address field and press

Enter.

To configure the parameters for each preset do the following:

1. Select Video

Settings from the

Video drop down

menu. The Encoder

Setting screen

appears.

2. Configure the video

and audio parameters

as required for the

preset and click

Apply.

3. Enter:

Password = root

Note: The HDT-1000S2

transmit frequency settings

may be configured only via

the web browser, and only by

qualified service personnel when the correct password entered. To avoid unauthorized access,

the factory assigned password must be changed immediately, using the procedure outlined in

this manual.