User Manual

1-9HDT-1000S2 User and Technical
Rev 1
5.4 Addressing Alarms
LEDs illuminate when a fault is detected during normal operation of the HDT-1000S2. The
following table shows a list of faults and what to do when they appear.
Indicator Meaning Suggested Technical Staff Action
RF HI Illuminates to indicate that the RF Power
is set to HI.
Select the power level required to
optimize the link.
VID Illuminates to indicate the presence of a
valid NTSC or PAL analog composite
video signal, as well as an ASI, or HD-
SDI digital video signal.
Check the video camera/source and
cabling to ensure the video signal is
reaching the transmitter.
CRYPTO Illuminates to indicate that the transmitter
is transmitting the encryption code
associated with the preset.
Verify whether encryption is required and
properly configured for the selected
preset.
ALARM Illuminates to indicate that there is an
alarm or fault detected.
Connect to the ethernet interface to
diagnose the source of the alarm.