User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls
- 3.3 Function Buttons
- 3.4 Status LEDs
- 3.5 Display and Keypad
- 3.6 Frequently Performed Tasks
- 3.6.1 Turning the power ON and OFF
- 3.6.2 Activating and deactivating the transmitter
- 3.6.3 Switching between HI and LOW power
- 3.6.4 Selecting Channel and Offset
- 3.6.5 Switching between antennas
- 3.6.6 Switching antenna polarization
- 3.6.7 Switching bands
- 3.6.8 Switching between Analog and Digital modes
- 3.6.9 Setting for Remote operation
- 3.7 Menu Maps
- Channels & Frequencies
- Glossary
- Index
Channels & Frequencies A-3CodeRunner 2 Operator’s Guide/Tech Ref Manual
Note
As of the publication of this manual, the 14.5 MHz channel plan was not approved for use in the US.
Table A-2: 2 GHz RF Channel Guide (U.S. Broadcast) - 14.5 MHz Channel Plan
Channel (-) Offset (MHz) (0) Center (MHz) (+) Offset (MHz) (++) Offset (MHz)
-4.25MHz 14.5MHzspacing +4.25MHz
1 2012.00 2015.50 2019.00 00000.000
2 2026.75 2030.25 2033.75 00000.000
3 2041.25 2044.75 2048.25 00000.000
4 2055.75 2059.25 2062.75 00000.000
5 2070.25 2073.75 2077.25 00000.000
6 2084.75 2088.25 2091.75 00000.000
7 2099.25 2102.75 2106.25 00000.000
8 2454.25 2458.50 2462.75 00000.000
9 2471.25 2475.50 2479.75 00000.000
10 2487.75 2492.00 2496.25 00000.000
11 00000.000 00000.000 00000.000 00000.000
12 00000.000 00000.000 00000.000 00000.000
13 00000.000 00000.000 00000.000 00000.000
14 00000.000 00000.000 00000.000 00000.000
15 00000.000 00000.000 00000.000 00000.000