User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls
- 3.3 Function Buttons
- 3.4 Status LEDs
- 3.5 Display and Keypad
- 3.6 Frequently Performed Tasks
- 3.6.1 Turning the power ON and OFF
- 3.6.2 Activating and deactivating the transmitter
- 3.6.3 Switching between HI and LOW power
- 3.6.4 Selecting Channel and Offset
- 3.6.5 Switching between antennas
- 3.6.6 Switching antenna polarization
- 3.6.7 Switching bands
- 3.6.8 Switching between Analog and Digital modes
- 3.6.9 Setting for Remote operation
- 3.7 Menu Maps
- Channels & Frequencies
- Glossary
- Index
Routine Operation 3-14CodeRunner 2 Operator’s Guide/Tech Ref Manual
7. BkltDly (Backlight Delay) also controls whether the
display defaults to the Main Screen or not.
If BkltDly is set to ON
- backlight stays on continuously
AND
- display does not default to the Main Screen
Any other setting of BkltDly will cause the backlight
to turn off and the display to default to the Main Screen
after the selected period of time.
8. Col Bar Gen controls the Digital Color Bar
Generator.
9. The menu choices in the Video Modulator and Audio
Modulator menus only appear if Mode is set to
INTERNAL MPEG/COFDM.
10. The only options that are implemented and functional
are:
- INTERNAL MPEG/COFDM
- EXTERNAL IF
The remaining options:
- INTERNAL BASEBAND
- INTERNAL COFDM ONLY
- INTERNAL DVB-S
are not implemented and are not functional.