User Manual

Routine Operation 3-13CodeRunner 2 Operator’s Guide/Tech Ref Manual
Notes - Menu Maps
Analog
1. To access the Main Menu, press the Menu key twice.
2. To prevent accidental activation, all menu keys and
function buttons will become locked out after 30 sec.
of inactivity. To unlock, press the first desired key or
button twice.
3. PA Adjust only operates when PA is set to XMIT.
4. BkltDly (Backlight Delay) also controls whether the
display defaults to the Main Screen or not.
If BkltDly is set to ON
- backlight stays on continuously
AND
- display does not default to the Main Screen
Any other setting of BkltDly will cause the backlight
to turn off and the display to default to the Main Screen
after the selected period of time.
5. REM menu option only appears on Main Screen if
RmtCntrl is set to ENABLED.
6. Col Bar Gen controls the Analog Color Bar
Generator.
Digital
1. HI/LOW power selection only operates if
- Attn (Attenuation) is set to AUTO
AND
- Mode is set to
INTERNAL MPEG/COFDM
2. The menu options for modulation are only available
when
- Mode is set to
INTERNAL MPEG/COFDM
Otherwise the menu options will not appear. Selecting
any of the modulation menus will cause the display to
show Disabled or Inactive.
3. To access the Main Menu, press the Menu key twice.
4. To prevent accidental activation, all menu keys and
function buttons will become locked out after 30 sec.
of inactivity. To unlock, press the first desired key or
button twice.
5. PA Adjust only operates when PA is set to XMIT.
6. REM menu option only appears on Main Screen if
RmtCntrl is set to ENABLED.