User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls
- 3.3 Function Buttons
- 3.4 Status LEDs
- 3.5 Display and Keypad
- 3.6 Frequently Performed Tasks
- 3.6.1 Turning the power ON and OFF
- 3.6.2 Activating and deactivating the transmitter
- 3.6.3 Switching between HI and LOW power
- 3.6.4 Selecting Channel and Offset
- 3.6.5 Switching between antennas
- 3.6.6 Switching antenna polarization
- 3.6.7 Switching bands
- 3.6.8 Switching between Analog and Digital modes
- 3.6.9 Setting for Remote operation
- 3.7 Menu Maps
- Channels & Frequencies
- Glossary
- Index
Routine Operation 3-3CodeRunner 2 Operator’s Guide/Tech Ref Manual
3.4 Status LEDs
The CodeRunner 2 has four Status LEDs to keep you informed
about the status of the system (See Figure 3-1 on page 3-4).
Those LEDs are described in Table 3-1.
Table 3-1: Status LEDs
Panel
Label
Description Color
POWER Indicates IDU is powered
up.
Green
IDU Alarm Fault condition in Indoor
Unit (IDU).
Yellow
RFU Alarm Fault condition in RF Unit
(ODU).
Yellow
PA On Power Amplifier section of
RFU is powered up
(actively transmitting).
Green