Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 83
Invisible place holder
Figure 3-47. View Event Log Screen
Invisible place holder
• Clear Event Log—Purges the log of all stored events.
TIP: Save your Event Log before clearing it to retain poten-
tially valuable troubleshooting information. See USING
CONFIGURATION SCRIPTS on Page 181 for an over-
view on how to transfer files from the transceiver to a
computer on the network using TFTP (Trivial File
Transfer Protocol).
• Send Event Log (Telnet or Terminal only)—Initiates TFTP trans-
fer of the Event Log in a plain text (ASCII) file to a TFTP server
on the connected LAN.
• Event Log Host Address (Telnet or Terminal only)—IP address of
the computer on which the TFTP server resides.
[
Any valid IP address; 127.0.0.1]
• Event Log Host Filename (Telnet or Terminal only)—Name to be
given to the Event Log file sent to the TFTP server for
archiving.
[Any 40-char alphanumeric string; eventlog.txt]
NOTE: You may wish to change the Event Log file name to reflect the
type of log you intend to archive, or its date.
•
TFTP Timeout (Telnet or Terminal only)—Number of seconds
the TFTP server waits for a packet ACK (acknowledgment)
from the transceiver before suspending the file transfer. [
10 to
120 seconds; 30
]
•
Syslog Server Address—The radio can also pass log messages on
as they occur to a syslog server. Use this field to enter the IP
address of this server. [
Valid server IP address]