Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 75
Group Database Menu
The Group Database Menu (Figure 3-38) shows the remotes associated
with this AP that belong to the specified Group ID.
Invisible place holder
Figure 3-38. Group Database Menu
Group ID—Allows the selection of a particular group and displays the
remote radios defined for the group. [0-15; 0]
UnitID—The unit ID of the associated remote.
GroupID—The ID number of the group.
Com Port—The COM port that the remote uses to pass the serial
multicast traffic associated with this Group ID.
Endpoint Database Menu
The Endpoint Database Menu shows all non-entraNET Ethernet devices
that are known to the transceiver; this is equivalent to the AP table of IP
devices. The list shows endpoint MAC and IP addresses, as well as
packet exchange data.
NOTE: A Remote does not have an IP address; rather, it acts as a trans-
parent bridge for IP traffic to the connected Ethernet endpoint.