Specifications

74 GE MDS entraNET Reference Manual 05-4055A01, Rev. D
Remote Database Menu
The Remote Database Menu (Figure 3-37) shows several parameters
related to the associated Remotes. It is updated about once every 8 sec-
onds.
Invisible place holder
Figure 3-37. Remote Database Menu
• UnitID—The unit ID of the associated remote.
• State—Shows whether or not the Remote is connected to the AP.
• AgeOut—Number of minutes until the entry expires and is removed
from the table. Each AP maintains a table with the addresses of the
devices it communicates with. The AgeOut countdown is restarted to
the Database Timeout value every time a message to or from that
device is detected. If no traffic with that device occurs, and it does
not respond to a final handshake request, it then “ages out” of the
table.
An expired Remote must reconnect before it is again included in the
table. (See
Database Timeout on the Wireless Network Menu,
Figure 3-32 on Page 69.)
•
TX Pkts—Number of packets sent to this Remote.
• RX Pkts—Number of packets received from this Remote.
• Num EPs—Number of endpoints connected to this Remote.