Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 71
Manage Selected Remote Menu
Figure 3-34. Manage Selected Remote Menu
• Device Information—Selecting this item brings up a submenu
(Figure 3-36) where you may change a Remote radio Owner,
Name, and Location. Hardware and software version information,
including the bootloader version, is also displayed.
• Network—Tool for control of the Ethernet port (enable
or disable).
• Radio—Tool for setting the transmit power level (in dBm).
• Serial Configuration—Tool for configuring COM1 and COM2
parameters, including port mode, baud rate, byte format,
inter-packet delay, and buffer size.
• Statistics—Presents packet throughput and retry data for the
selected Remote.
• Remote Reprogramming—Brings up a submenu (Figure 3-35) for
sending new firmware images to specific Remotes, and for
specifying the image that will be active when the radio is
restarted.
•
Authorization—Brings up a submenu showing the authorized
capabilities of the Remote entered in the Unit ID field (enabled
or disabled): Ethernet capabilities, network management, serial
capabilities, and multiple endpoints.