Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 57
3.6.2 Local Serial Configuration Menu
Figure 3-22. COM1/2—Local Serial Configuration Menu
• Port Status (COM1, COM2)—Defines whether the specified
port is enabled or disabled to pass payload data. COM1 is
typically disabled to allow it to be used for console
terminal control.
NOTE: If COM1 is inadvertently enabled, it will become impossible to
log in using a console terminal connected to the COM1
connector. This problem can be remedied by typing the Hayes
modem-compatible escape sequence of + + + followed
by . This restores COM1 to console terminal mode. You
must log in again.
•
Serial Configuration Wizard—This is a tool for configuration of
the serial ports using a step-by-step process. When the
Wizard is started, you may choose between beginning the
step-by-step process, or simply viewing the current settings
(see Figure 3-23).
SHIFT
ENTER