Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 49
3.4.4 Mobility Configuration Menu
Invisible place holder
Figure 3-16. Mobility Configuration Menu
Invisible place holder
• BSP Routing Enable—This parameter controls intra-cell transmis-
sion and routing of Basic Serial Protocol packets.[Enabled, Dis-
abled
; Disabled]
• IAPP Enable—This parameter enables the Inter-Access Point
Protocol (IAPP), which allows APs to pass payload data over
the Ethernet LAN. [Enabled, Disabled; Disabled]
• Unit Update Enable—This parameter allows the AP to immedi-
ately send out an IAPP update when a Remote connects
or disconnects. [Enabled, Disabled; Disabled]
• IAPP Multicast Address—An address that allows multicast mes-
saging to travel to all radios in a subnetwork (all radios with a
common network address). [224.254.1.1]
• IAPP Multicast Port—An assigned software port that allows mul-
ticast messaging to travel to all radios in a subnetwork (all
radios with a common network address). [
39990]
• IAPP Multicast TTL—Multicast “time to live” number. This is the
number of hops that a message is allowed to make before it is
no longer transportable. This feature prevents “infinite life”
packets that degrade system performance. [1-15; 1]
• IAPP Unicast Port—An address that allows messaging to travel to
a specific radio when that message has originated from another
subnetwork. [
39990]