Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 45
Remote Serial Gateway—Tools to configure the data connections
to the Remote transceiver serial ports. (See “Remote Serial
Gateway Configuration (IP-to-Remote Serial)” on Page 62.)
Security Configuration—Tools to configure the transceiver secu-
rity services. (See “SECURITY CONFIGURATION” on
Page 64.)
Wireless Network—Tools to manage Remote and AP databases,
and manage Remote radios. (See “WIRELESS NETWORK
MENU” on Page 69.)
Statistics/Event Log—Tools to measure the radio and data layer
network performance. (See “STATISTICS AND EVENT LOG”
on Page 77.)
Device Information—Top-level customer-specific and definable
parameters, such as the date, time, console baud rate, and device
name information. (See “DEVICE INFORMATION MENU” on
Page 84.)
Maintenance/Tools—Tools for upgrading and selecting firmware
images and configuration files, and applying Authorization
Keys to change radio capabilities. (See “MAINTENANCE AND
TOOLS” on Page 85.)
Redundancy—Places the radio in a “1+1” redundancy-compati-
ble mode. This mode is specifically for use with GE MDS P22
packaged model chassis. Please check with your GE MDS sales
representative for available configurations.
(See “REDUNDANCY MENU” on Page 93.)
DNP3 Routing—This selection provides access to a submenu
where DNP3 routing attributes can be managed. (See “DNP3
ROUTING MENU” on Page 97.)
3.4 CONFIGURING NETWORK
PARAMETERS
3.4.1 Network Configuration Menu
The Network Configuration Menu (Figure 3-13) is the home of all IP-
and Ethernet-level parameters.