Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 43
Log Out via Web
Browser
Click on Logout in the left-hand frame of the browser window. The
right-hand frame changes to a log-out page. Follow the remaining
instructions on this screen.
This completes the instructions for connecting to the entraNET radio for
PC configuration and control. The next section contains detailed menu
screens and settings that you can use to specify the behavior of the radio.
3.3 BASIC DEVICE INFORMATION
3.3.1 Starting Information Screen
Upon successful log-in to the menu system, the Starting Information
Screen appears. This screen provides a read-only overview of the cur-
rent operating conditions on the transceiver (see Figure 3-11). (Some
items can be changed using the Device Information Screen described on
Page 84.)
Invisible place holder
Figure 3-11. Starting Information Screen
• Device Name—This is a user-defined name for the radio that
appears on every screen (40 characters maximum).
• IP Address—Shows the radio Internet Protocol (IP) address.
• Device Status—Shows the transceiver condition:
• Operational—The radio is operating normally
• Alarmed—An alarm event has been logged and not cleared.
NOTE: If an alarm is present when this screen is displayed, an “A”
appears to the left of the Device Status field. (The PWR LED
also flashes.) Typing “A” on your keyboard takes you directly
to the Current Alarms Screen.