Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 39
NOTE: When using a Local Area Network (LAN) to access the radio,
it may be necessary to change the computer IP access to the
LAN in order to be compatible with the entraNET radio
(compatible subnets). You can identify or verify the radio IP
address by using a Local Console session to communicate with
the entraNET radio through its COM 1 port and viewing the
Starting Information Screen.
2. Start the Telnet program on your computer, targeting the IP address
of the radio to which you are connected, and press .
TIP: A Telnet session can be started on most PCs by selecting Start > Pro-
grams > Accessories > Command Prompt. At the command prompt
window, enter the word telnet, followed by the radio IP address (for
example,
telnet 10.1.1.168). Press to display the Telnet log-in
screen.
NOTE: Never connect multiple radios to a network with the same IP
address. Address conflicts result in improper operation.
3. Enter the username (the username default is admin). Press .
Next, the Password prompt appears. Enter your password (the default
password is admin). (For security, your password keystrokes do not
appear on the screen.) Press .
The Starting Information Screen is displayed (Figure 3-8). From
here, you can review basic information about the radio, or press G to
proceed to the Main Menu.
NOTE: Passwords are case sensitive. Do not use punctuation marks.
You may use up to eight alphanumeric characters.
ENTER
ENTER
ENTER
ENTER