Specifications

38 GE MDS entraNET Reference Manual 05-4055A01, Rev. D

NOTE: If the radio is powered up or restarted while connected to a

terminal, a series of pages of text relating to the startup of the

internal microcomputer is displayed. Wait for the log-in screen

before proceeding.

4. Press to receive the login prompt.

5. Enter the username (the default username is admin). Press .

6. Enter your password (the default password is admin). (For security,

your password keystrokes do not appear on the screen.) Press

NOTE: Passwords are case sensitive. Do not use punctuation marks.

You may use up to eight alphanumeric characters.

The Starting Information Screen is displayed (Figure 3-7). From

here, you can review basic information about the radio, or press

G to

proceed to the Main Menu.

Invisible place holder

Figure 3-7. Starting Information Screen—Local Console Session

Starting a Telnet

Session

NOTE: This method requires that you know the IP address of the radio

beforehand. If you do not know the address, use the Local

Console method (above) and access the Starting Information

Screen. The address is displayed on this screen.

1. Connect a PC to the LAN port on the radio, either directly or via a

network. If connecting directly, use an Ethernet crossover cable; if

connecting via a network, use a straight-through cable. The

LAN

LED lights to indicate an active connection.

ENTER