Specifications

188 GE MDS entraNET Reference Manual 05-4055A01, Rev. D
The connector uses standard Ethernet RJ-45 cables and wiring. The
pinout graphic and table below may be used to construct a custom cable,
if required.
Figure 8-3. LAN/ETH Port (RJ-45) Pinout
(viewed from the outside of the radio)
8.3.2 COM1 Port
A PC may be connected to the Remote transceiver COM1 port (RJ-12)
for diagnostics and configuration. Pinout information for the COM1 port
is provided in Figure 8-4 and Table 8-2.
Figure 8-4. COM1 Port (DCE)
(viewed from the outside of the radio
)
Pin Functions Ref.
1 Transmit Data (TX) Out High
2 Transmit Data (TX) Out Low
3 Receive Data (RX) In High
4 Unused --
5 Unused --
6 Receive Data (RX) In Low
7 Unused --
8 Unused --
1 2 3 4 5 6 7 8
1 2 3 4 5 6
Table 8-2. COM1 Port Pinout, RS-232 Interface
Pin Functions COM1 Port
(DCE)
1 Unused
2 Unused
3 Unused
4 Receive Data (RXD) Out
5 Transmit Data (TXD) In
6Ground —