Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 137
10.The next screen prompts for the baud rate and byte format.
Press A to set the Data Baud Rate. Press to cycle through the
baud rate options until the baud rate for your equipment is dis-
played. (In the example below, the baud rate is 19200.) Press
to accept the Data Baud Rate.
Press B to set the Data Byte Format. Press to cycle through
the byte format options until “8N1” is displayed. Press to
accept the Data Byte Format. Then press N to continue.
Figure 5-24. Set Data Baud Rate and Data Byte Format
11.The next screen prompts for the data buffer size and inter-packet
frame delay.
Press A to select Buffer Size. Press to cycle through the
buffer size options until “256” is displayed. Press to accept
the Buffer Size.
Press
B to select Inter Frame Delay. Press to cycle through
the options until “4 Character Times” is displayed. Press to
accept the Inter Frame Delay. Then press
N to continue.
SPACE
ENTER
SPACE
ENTER
SPACE
ENTER
SPACE
ENTER