Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 133
5.5.1 Step-by-Step Instructions for Configuring a
Point-to-Multipoint Serial Connection
1. Connect a powered AP radio to a PC.
2. At the PC, open a connection with the Access Point radio using a
terminal, Telnet, or Web browser session.
3. Press G to display the Main Menu.
4. From the Main Menu, press D to select Local Serial Configuration.
Figure 5-18. Main Menu
5. The Local Serial Configuration menu displays the status of the AP
COM1 and COM2 ports (enabled or disabled). Set the COM2 port to
“enabled”.
Press
C to select COM2, then press to toggle between
“enabled” and “disabled”. Press when “enabled” is displayed
to select it.
SPACE
ENTER