Specifications

130 GE MDS entraNET Reference Manual 05-4055A01, Rev. D
13.The next screen prompts for the Port Status. Press A to select Port
Status. Press to toggle between “enabled” and “disabled”.
Press when “enabled” is displayed. Then press N to continue.
Figure 5-14. Enable Port
14.The final screen displays all the previous settings for your review.
The settings should be:
• COM2 Port Status: Enabled
• COM2 Mode: Serial to Serial
• COM2 Remote Unit ID: [Unit ID displayed]
• COM2 Remote COM Port: COM2
• COM2 Baud Rate: 19200
• COM2 Byte Format: 8N1
• COM2 Buffer Size: 256 Bytes
• COM2 Inter Packet Delay: 4 Character lines
SPACE
ENTER