Specifications

128 GE MDS entraNET Reference Manual 05-4055A01, Rev. D
10.The next screen prompts for the input serial data port. Press A and
then press to toggle to COM2. Press to accept the dis-
played selection. Then press N to continue.
Figure 5-11. Select Remote Port
11.The next screen prompts for the baud rate and byte format.
Press A to set the Data Baud Rate. Press to cycle through the
baud rate options until “19200” is displayed. Press to accept
the Data Baud Rate.
Press B to set the Data Byte Format. Press to cycle through
the byte format options until “8N1” is displayed. Press to
accept the Data Byte Format. Then press N to continue.
Figure 5-12. Set Data Baud Rate and Data Byte Format
SPACE ENTER
SPACE
ENTER
SPACE
ENTER