Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 127
8. The Wizard displays a prompt to select a point-to-point or
point-to-multipoint connection. Press A to select “One Remote”
(point-to-point).
Figure 5-9. Point-to-Point Selection
9. The Wizard displays a prompt for the Unit ID of the single Remote
radio. Press A to set the Remote ID (generally the last four digits of
the Remote serial number). Type the Unit ID of the Remote radio.
Press to accept the Unit ID. Then press N to continue.
Figure 5-10. Set Remote Unit ID
ENTER