Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 117
Optional arguments:
ON: Turns the Stattracker function on
OFF: Turns the Stattracker function off
30000–60000: Allowable range of port numbers that may be entered
CMD—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
VER Displays the current software version information.
Optional arguments:
CMD—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
CONFIG= —Displays the Configuration Table version number.
EVENT= —Displays the Event List version number.
H2H= —Displays the Host-to-Host protocol version number.
HREV= —Displays the OIB board hardware version number.
IMAGE=<image>—Displays the number of the currently active image.
LOG= —Displays the current log version number.
RADIOSW= —Displays the current software version number (xx.yy.zz).
SREV1= —Displays the software version number (xx.yy.zz).
SREV2= —Displays the software version number (xx.yy.zz).
XHREV= —Displays the radio board hardware revision number.
XSREV1= —Displays the radio software version.
XSREV2= —Displays the radio software version.
4.6 UPGRADING REMOTE FIRMWARE
Remote radio firmware may be upgraded using the Remote Firmware
Upgrade Utility available from GE MDS. A local PC connection to the
radio is required to use this utility.