Specifications

110 GE MDS entraNET Reference Manual 05-4055A01, Rev. D
NETADDR=<netaddr>—Sets or displays the network (system) address
(0-30000) when in direct mode.
PWR=<range integer>—In ROOT mode, this command sets the radio power
setting in dBm (the range depends on the radio model).
REPEAT=<range integer>—In ROOT mode, this command sets the Broad-
base Repeat Count.
0: Min=0
15: Max=15
RETRY=<range integer>—In ROOT mode, this command sets the Max-
imum Unicast Retry Count.
0: Min=0
15: Max=15
SKIPZONES=<bitmap>—In ROOT mode, this command sets the Skip zones
Binary Map (HEX: preceded by 0x).
bit0:ZONE1; 1=Skipped 0=Active
bit1:ZONE2; 1=Skipped 0=Active
bit2:ZONE3; 1=Skipped 0=Active
bit3:ZONE4; 1=Skipped 0=Active
bit4:ZONE5; 1=Skipped 0=Active
bit5:ZONE6; 1=Skipped 0=Active
bit6:ZONE7; 1=Skipped 0=Active
bit7:ZONE8; 1=Skipped 0=Active
STATE=—(read only) Displays the current Direct mode status.
Currently operating in Infrastructure mode
Currently operating in Direct mode
TYPE=—Sets or displays the role of this radio in Direct mode.
NODE: Operates as one of the Node Remotes
ROOT: Operates as the Single Root Remote
ENCRYPT Sets or displays the configuration for data encryption.
Optional arguments:
MODE=<ON|OFF>—Sets or displays the data encryption mode.
ON: Data encryption on
OFF: Data encryption off
PHRASE=<string>—Sets or displays the Encryption Pass Phrase (8–41
characters).