Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 109
LOCATION—Sets or displays the radio location (1-40 ASCII characters).
UPTIME—(read only) Displays the current system uptime in the format
<YY-MM-DD hh:mm:ss>.
SER—Device serial number.
DIRECT Sets or displays the configuration for direct-mode operation
(Remote-to-Remote). This is a special mode intended primarily for rail-
road applications where Remotes communicate with each other.
Optional arguments:
CMD—Displays all settable optional arguments and their current values.
You can copy this list to a text file as a record of your configuration.
CWMIN=<range integer>—In ROOT mode, this command sets the Min-
imum Contention Windows size (<CWMAX+1).
0: Min=0
15: Max=15
CWMAX=<range integer>—In ROOT mode, this command sets the Max-
imum Contention Windows (>CWMIN-1).
0: Min=0
15: Max=15
DEFAULT=<mode>—Sets or displays the default power-up state direct
mode.
ON: Default direct state is Direct Mode
OFF: Default direct state is Infrastructure Mode
EXT: Default direct state is controlled by an external I/O pin
FEC=<ON|OFF>—In ROOT mode, this command sets the Forward Error
Correction setting.
ON: FEC on
OFF: FEC off
HOPTIME=<ms>—In ROOT mode, this command sets the time between fre-
quency hops:
7: 7 milliseconds
14: 14 milliseconds
28: 28 milliseconds
MODE=<mode>—Sets operation to Direct or Infrastructure mode.
ON: Enter Direct mode
OFF: Enter Infrastructure mode
EXT: Enter Direct mode by external control