Specifications

102 GE MDS entraNET Reference Manual 05-4055A01, Rev. D

2. At the username prompt, enter your username (admin is the default).

3. At the Password prompt, enter your password (admin is the default).

4.4 Commands

Table 4-1 provides a quick reference to the various commands for the

Remote transceiver. Detailed descriptions for these commands follow in

Section 4.5.1.

4.4.1 Entering Remote Commands

To enter a command:

• Type the command (including any spaces), then press .

To request or set a value:

• Type the command, press =, then press .

For example:

• Type COMMAND_ARGUMENT= to query a setting or value.

• Type COMMAND_ARGUMENT=VALUE to set values.

To get help with a command:

• Type the command, press , press ?, then press .

4.5 Minimum Configuration for Remotes

Remote radios require little configuration to operate, as most of the con-

figuration is conducted at the AP. The minimum set of parameters that

needs to be set for a Remote are:

RADIO UNIT—32-bit radio address. Defaults to the radio serial

number, but is settable.

RADIO NETADDR—Radio network address. Must match the AP

address.

RADIO PWR —RF output power setting in decibels (dB). The

range is 20-30 for non-ETSI 900 MHz radios, 20-27 for

non-ETSI 2400 MHz radios, and 10-20 for ETSI 2400 MHz

radios.

ENTER

SPACE ENTER