Specifications

05-4055A01, Rev. D GE MDS entraNET Reference Manual 97
Invisible place holder
Figure 3-62. Packet Rx Errors Exceeded Threshold Menu
These configuration settings are intended for data-intensive applications
and must be customized for your specific application.
Maximum Receive Errors—Here, you specify the number of packet errors
that must be exceeded before a redundant AP considers itself to be mal-
functioning. This setting works in conjunction with the Interval setting
below. [0-1000; 300]
• Receive Error Count Interval—This field is used for entering the
number of seconds to count Packet Receive errors (works with
Maximum Receive Errors above). [Time interval; 300 seconds]
3.13 DNP3 ROUTING MENU
This menu (Figure 3-63) is used to configure the AP to support DNP3
protocol routing. See also DNP3 Protocol-Aware Networks on Page 8.
NOTE: Detailed information on the DNP3 protocol is available on the
DNP Users’ Group Web site at www.dnp.org.