Specifications

92 GE MDS entraNET Reference Manual 05-4055A01, Rev. D
3.11.5 Transmitter Test Menu
This screen (Figure 3-56) allows testing of the radio transceiver RF
transmitter section (power amplifier). Selections of specific frequencies
and key duration, as well as transmit key behavior, can be modified from
this screen. This function is useful for troubleshooting specific radio
amplifier issues.
Invisible place holder
Figure 3-56. Transmitter Test Menu
• Frequency—Used to set the carrier frequency used during trans-
mitter testing.
[900 MHz radios: 902.200000-927.600000; 916.000000 MHz]
[2.4 GHz radios: 2400.00000-2483.500000; 2400.000000 MHz]
• Duration—Sets the key duration time for transmitter testing.
[1-600 seconds; 600]
•
TX Key—Used to activate the transmitter on the test frequency.
There are two modes: Normal and Forced. Normal is the default
selection, and keeps the transmitter in standard frequency hop-
ping configuration. Forced keys the transmitter on the specified
test frequency. [
Normal, Forced; Normal]