User guide

Advanced Controls
Menu Controls
The SHOWWX+ was designed as a plug-and-play device, however, some users may want
to make adjustments to the settings such as change colors, adjust aspect ratio, and adjust
brightness. The following information will help you understand how to fully operate
the SHOWWX+.
Hot Keys
The SHOWWX+ includes two hot keys to allow the
user to quickly adjust the image depending on the
type of content being shown.
Color Mode: Color mode can be changed without
going into the Menu screen by pressing the
button
to change the color mode. Press the
button to
cycle through the color modes.
Gamma Mode: Gamma mode can be changed
without going into the Menu screen by pressing on
the
button. Press the button to cycle through
the gamma modes.
Note: The Color Mode hot key also includes the
ability to invert the image. Inverting the image may
improve the readability of certain images. Also,
if the content background is predominately white,
then inverting the image (e.g., white becomes black) will extend battery life.
Onscreen Menu
The SHOWWX+ has an onscreen display to allow the user the ability to make advanced
changes to the projector. All settings changed by the user will remain even when powered off.
Brightness: High (default) / Medium / Low
Color Mode: Brilliant (default) / Standard / Inverted / Gamma
Aspect Ratio: Widescreen (default) / Normal / Zoom
System: Image Alignment / Color Alignment / Properties / Reset Defaults
15