Specifications

Chapter 2 Firmware Commands 77
Sensitivity Set
Note:
MicroTouch provides this command for compatibility with older touchscreen
controllers. To ensure compatibility with all existing and future MicroTouch controllers,
do not use this command when developing your touch drivers and applications.
Syntax: <SOH>SEn<CR>
where:
n = Sensitivity level.
0 = Normal touch (default)
1 = More sensitive (level 1)
2 = Very sensitive (level 2)
3 = Most sensitive (level 3)
Description: Changes the sensitivity of the touchscreen. Use the sensitivity setting
to adjust the touch for differences in systems and touchscreen
implementations. You can adjust the sensitivity level for your personal
preference.
Upon execution of this command, the sensitivity setting (touchdown
threshold and liftoff threshold), the current operating modes, and the
current data format are stored in the controller’s non-volatile memory
(NOVRAM).
Response: <SOH>0<CR> Positive response.