Specifications

Touch Controllers Reference Guide64
Mode Stream
Syntax: <SOH>MS<CR>
Description: Sends a continuous stream of X, Y coordinate data when you touch
the screen. The controller continues to send data as long as you touch
the screen. The controller sends the data even if the touch is
stationary and unchanging.
The format of the coordinate data depends on the last format
command received by the controller.
If you are using a TouchPen controller, the controller must be in the
appropriate mode (Pen or Finger mode, Pen Only mode, or Finger
Only mode) for the pen or finger to be detected.
Note:
Format Raw automatically uses Mode Stream to send X, Y
coordinate data.
Response: <SOH>0<CR> Positive response.