Specifications

Chapter 2 Firmware Commands 53
MSB* Bits LSB*
Data Sequence 7 6543210
Zone - Byte 1 S7 S6 S5 S4 S3 S2 S1 S0
X - Byte 2 0 0 1 X9 X8 X7 X6 X5
x - Byte 3 0 0 1 X4 X3 X2 X1 X0
Y - Byte 4 0 0 1 Y9 Y8 Y7 Y6 Y5
y - Byte 5 0 0 1 Y4 Y3 Y2 Y1 Y0
*
MSB = Most Significant Bit, LSB = Least Significant Bit
If you send a Format Zone command and then send a Mode Status
command, the Format Zone command no longer reports whether the
the touch point is within the calibration range (zone). Instead, Format
Zone sends a touch status byte preceding the X, Y coordinate data.
For more information on the status byte, refer to the Mode Status
command later in this chapter.