Specifications

Chapter 2 Firmware Commands 49
Response: <SOH>0<CR> Positive response.
After the controller is in Format Raw mode, the controller returns a
response in the following format:
<7-byte-packet><7-byte-packet>...<7-byte-packet>...
Byte Bits 0 – 7
1 b0 – b3: Drive level (amount of signal sent from controller)
b4 – b6: Reserved
b7: Synchronization bit (Always 1)
2 b0 – b2: 3 most significant bits of upper left (UL) corner
b3: Always 0
b4 – b6: 3 most significant bits of lower left (LL) corner
b7: Always 0
3 b0 – b2: 3 most significant bits of lower right (LR) corner
b3: Always 0
b4 – b6: 3 most significant bits of upper right (UR) corner
b7: Always 0
4 b0 – b6: 7 least significant bits of lower left (LL) corner
b7: Always 0
5 b0 – b6: 7 least significant bits of upper left (UL) corner
b7: Always 0
6 b0 – b6: 7 least significant bits of upper right (UR) corner
b7: Always 0
7 b0 – b6: 7 least significant bits of lower right (LR) corner
b7: Always 0