Specifications

Touch Controllers Reference Guide32
Calibrate Interactive
Note:
MicroTouch provides this command for compatibility with older touchscreen
controllers. To ensure compatibility with all existing and future MicroTouch controllers,
do not use this command when developing your touch drivers and applications.
Syntax: <SOH>CI<CR>
Description: Initiates an interactive, two-point edge calibration. The Calibrate
Interactive command functions like the Calibrate New command
except for the following conditions:
Calibrate Interactive does not check if a touched point is within the
limit. Calibrate Interactive performs no error checking.
Calibrate Interactive swaps the points if the location of the lower
left point and upper right point are reversed.
MicroTouch recommends that you use Calibrate Extended to calibrate
the touchscreen.