Specifications

Appendix D Daughterboard Controllers 107
Daughterboard Controller Mechanical
Figure 6 shows the overall dimensions of the Daughterboard
controller, the locations of the mounting holes and connectors, and the
maximum component height.
Figure 6. Daughterboard Controller
Technical Specifications
Power: Power is supplied by the host system. Requires
70 mA typical, 85 mA maximum at +5 VDC,
5% regulation, 100 mV maximum ripple and
noise.
Operating
Temperature
0 to 55 degrees C.
Relative Humidity: 0 to 95% noncondensing.
Circuit Board Size: 3.5 x 2.25 inches, 0.3-inch clearance height.
Notes:
1. All holes are plated
thru and tied to ground.
2. All measurements
are in inches.
3. .xxx = .005