Specifications

Touch Controllers Reference Guide104
2.70 in
4.80 in
Pin 1
Pin 1
Notes:
1. Diameter of mounting holes is 0.175 inches.
2. Connectors are Molex 53015 series and OFNA R-06.
Pen
Connector
Sensor
Connector
The pen cable is a 6-wire cable with shield.
One-to-one connections; shield is tied to Pin 6.
Pin 6 (ground) not usually used. Instead, supply
ground to the controller by mounting through the
mounting holes to the chassis.
1.35 in
COM & Power
Connector
Pin 1
Microcontroller
8-pin standard
telephone jack
for connecting pen.
.60 in
Figure 5. Layout of the TouchPen Controller and Connectors