Installation guide

6 ChassisTouch FPD Monitors Installation Guide
3M Touch Systems Proprietary Information
DANGER
To reduce the risk of electric shock, which could result in serious personal
injury or death:
!
Do not service the Flat Panel Display.
!
Do not use non-conforming replacement parts.
!
Do not remove the cover or back of the monitor.
!
Do not place wet or damp objects on the monitor.
!
Do not expose the monitor to rain or other sources of water, steam, or
moisture.
!
Do not place foreign objects on the monitor or its cables.
!
Do not use a damaged power supply.
!
Do not use a power cord that is frayed or otherwise damaged.
CAUTION
To reduce the risk of glass breakage, which could result in personal injury:
!
Handle the monitor with care to avoid breaking the touch screen sensor.
The display contains glass parts. Dropping the display may cause the
glass parts to break.
!
Do not place foreign objects on the monitor.
CAUTION
To avoid possible environmental contamination, which could result in
personal injury, dispose of the flat panel display according to applicable
governmental regulations.
To avoid the risk of property damage follow these important
notes:
!
Plug power cord into appropriate power source.
!
Plug power cord into a grounded receptacle.
!
When unplugging power supply cord, pull on plug not cord.
!
Do not connect or disconnect this product during an electrical storm.
!
Install the display in a well-ventilated area. Always maintain adequate
ventilation to protect the display from overheating and to ensure reliable
and continued operation.
!
Do not expose this display to direct sunlight or heat. Passive heat may
cause damage to the metal case and other parts.
!
Do not install this display in areas where extreme vibrations may be
generated. For example, nearby manufacturing equipment may produce
strong vibrations. The vibrations may cause the display to exhibit picture
discoloration or poor video quality.
!
Ensure the metal enclosure does not contact the touch screen.
!
Be sure to gasket display to enclosure properly.
!
To avoid ergonomic concerns:
!
Do not install the monitor in a manner or location with awkward
accessibility.
!
Extended use may result in muscle, tendon, or fixed posture strains. It
is recommended you take periodic breaks from continuous use.