Installation guide
3M Touch Systems Proprietary Information
Overview
Congratulations on the purchase of your touch monitor, and welcome to
the world of 3M Touch Systems — a world where using a computer is
as simple as touching the screen. This guide describes how to set up
your 15.1" or 17" ChassisTouchâ„¢ flat-panel display (FPD) touch
monitor.
This document assumes you have basic computer skills. You should
know how to use the mouse and keyboard, choose commands from
menus, open and run application programs, and save files.
Important Safety Information
Read and understand all safety information before using this product.
Follow all instructions marked on the product and described in this
document. Pay close attention to the following installation warnings
and safety precautions.
Intended Use
The 15.1" or 17" ChassisTouchâ„¢ flat-panel display (FPD) touch
monitors have been designed and tested to replace an existing monitor
and convert it into a flat-panel touch screen. These models are intended
for indoor use only and are not designed for use in hazardous locations.
DANGER
To avoid the risk of fire and/or explosion, which could result in serious
personal injury or death, do not install this product in a hazardous location.
DANGER
To reduce the risk of fire, which could result in serious personal injury or
death, do not remove the cover or back of the monitor. There are no user
serviceable parts inside. Refer all servicing to qualified service personnel.