Installation guide

26 ChassisTouch FPD Monitors Installation Guide
3M Touch Systems Proprietary Information
the Windows shutdown mode. After finishing phase adjustment, click
on the "Cancel” to return to your original Windows display.
If you do an Auto configuration, the monitor will try to find the best
Clock Phase setting. If you are not satisfied with the auto adjustment,
please fine-tune the phase manually as described above.
Color Adjustment
When you choose the Color option from the OSD, this will bring up a
sub-menu that will allow you to adjust the color balance and level for
your display.
By adjusting a single color, you can make the picture look warmer
(biased towards red) or cooler (biased towards blue). Adjusting all three
levels will make colors appear more or less striking.
Video Level Select
This setting allows you to alter the contrast of display to take account of
VGA cards that use a higher signal voltage level.
Video Mode
TV is not supported.
Other Adjustments
You can change your OSD setting to display in other languages,
according to your preference. It is also possible to monitor the input
signal status in the status display row of the Information menu.