User guide

DiscView PRO User Guide
C-4
Entering the reset command will display a screen similar to:
If you enter dp discport list after performing a reset, a
screen similar to the one following will display. Notice that
the Status has changed from Unconfigured to Unattached.
The status light on the DiscPort is now solid amber, indicating
the DiscPort is configured, but unattached. If the status light
is still blinking four times amber, the DiscPort did not accept
the configuration. This is usually due to a typographical error
when entering the server name in the config command por-
tion. If the DiscPort is blinking five times amber, the image
file is not in the \login directory, or the image file name was
entered incorrectly. In both cases, it will be necessary to re-
peat steps 2 and 3 before continuing to step 4.
4. Command: dp host attach <servername> <discport>
Example: dp host attach support discport_402B06
This command will logically attach the DiscPort to the server.
The screen displayed will be similar to: