User guide

Chapter Eight – Jukebox Support
129
■ To install the jukebox driver software:
1. If it's not already running, start up DiscView PRO. In the
Map window, click on the server on which the DiskView
PRO Server Components were loaded.
2. Select Jukebox Driver... from the Install menu. The
Install Jukebox Driver dialog displays. It lists the
supported jukeboxes.
3. Click on the name of the jukebox driver you are installing.
The jukebox driver software was copied to the server
when the server components were installed. In most
cases, the driver will be installed from there. However, if
you want to install the driver from a disk, click on the
Have Disk button. Otherwise, click OK to continue.
If you are using a disk, the Install Driver dialogdisplays.
Select the appropriate drive letter, insert the disk, and
click OK.
The Install Jukebox Driver
dialog
The Install Driver
(from a disk)
dialog